<ruby id="agtze"></ruby>
<tbody id="agtze"></tbody>

<li id="agtze"></li><th id="agtze"><track id="agtze"><rt id="agtze"></rt></track></th>

<tbody id="agtze"></tbody>

<em id="agtze"><ruby id="agtze"></ruby></em>
<em id="agtze"><ruby id="agtze"></ruby></em>

常州億創從事精密鈑金加工為主的鈑金加工型企業

常州億創能源科技有限公司

示例圖片三
網站首頁 > 行業資訊 > 行業知識

沖壓件加工生產中模具和工藝的安全保障

2018-08-15 20:36:12 常州億創能源科技有限公司 閱讀

沖壓件加工的質量和精度很大程度上都將取決于它的模具,所以如果模具合格的話,工藝流程沒有問題的話,精密沖壓件就能符合標準。但大家不要忘了精密沖壓件生產過程中,還要重點考慮安全性設計問題。

The quality and precision of stamping parts depend largely on the mold, so if the mold is qualified and the process flow is not a problem, the precision stamping parts can meet the standard. But don't forget that the safety design needs to be considered in the production of precision stamping parts.

當然主要指的就是精密沖壓件模具的安全性問題,首先是結構上的設計,應盡量保證進料、定料、出件、清理廢料的方便。而在對于大型精密沖壓件加工的時候,如果必須要使操作人員的手入模內作業的話,就要可能減少入模的范圍,以及盡可能縮短身體某部位在模內停留的時間,盡量還要配備必要的防護措施和裝置。

Of course, it mainly refers to the safety of precision stamping die, first of all, the structural design, should try to ensure the convenience of feeding, fixing, discharging, cleaning waste. For large precision stamping parts, if it is necessary to make the operator's hand into the mold operation, it is possible to reduce the scope of the mold, and as far as possible shorten the body part in the mold stay time, as far as possible with the necessary protective measures and devices.

在對小型精密沖壓件的時候,本來就無需將身體的任意部位接近作業區域,所以更是要嚴禁這樣的做法。在進行沖壓件模具拆裝的時候,應方便安全,避免有夾手、割手的可能,減少不必要的傷害。

For small precision stamping parts, there is no need to close any part of the body to the working area, so this is strictly prohibited. When disassembling and assembling the stamping die, it should be convenient and safe, avoid the possibility of clamping and cutting hands, and reduce unnecessary damage.

另外,不允許在加工精密沖壓件過程中發生廢料或工件飛彈現象,因為這樣會影響操作者的注意力,甚至擊傷操作者。而且過多和過難的動作也不允許在沖壓的時候出現,以免造成危害。

In addition, scrap or workpiece missiles are not allowed to occur in the process of precision stamping, because this will affect the operator's attention, and even injure the operator. And too many and too difficult movements are not allowed to appear when stamping, so as not to cause harm.

要求作為精密沖壓件模具上的各種零件,應有足夠的強度及剛度,防止使用過程中損壞和變形,尤其是那些緊固零件要有防松動措施,避免意外傷害操作者??傊?,哪怕是很細微的問題都會影響安全,所以都要謹慎。

All kinds of parts on the precision stamping die should have enough strength and stiffness to prevent damage and deformation during use, especially those fastening parts should have anti-loosening measures to avoid accidental injury to operators. In short, even minor problems will affect safety, so be cautious.



標簽:   鈑金加工 鈑金加工廠家 鈑金 加工
手机真人捕鱼